Frame, Swinging Arm, Suspension Units and chainguards
Click on any parts highlighted red below to get more information or to add them to your shopping basket.
Parts contained
Bracket for weld repair
SLOTTED BRACKET WELD REPAIR (FOR COMMANDO CHAINGUARD)
in stock
part-no: 06.0634Earlier type 06.1272
CHAINGUARD for 'S' TYPE & 1970 ROADSTER Mk1 (Chrome plated)
in stock
part-no: 06.1272Extractor bolt kit
SWINGING ARM SPINDLE EXTRACTOR BOLT KIT (COMMANDO 750/850)
in stock
part-no: 13.2060Steering damper assembly
STEERING DAMPER KIT including all mounting parts for COMMANDO 750 850 (1971 onwards) Printable instructions on webshop
in stock
part-no: 06.4247/ANGrommet 1
GROMMET for WIRING HARNESS THROUGH FRAME immediately behind cylinder head COMMANDO 750 850
in stock
part-no: 06.7177Grommet 2
GROMMET 13/16" x 1"
in stock
part-no: 01.94901
MAIN FRAME ASSEMBLY 750 850 BLACK POWDER COATED (not 850 Mk3)
in stock
part-no: 06.54042
CERTIFICATION LABEL
in stock
part-no: 06.32472a
CERTIFICATION LABEL including stamping. Please specify stamping required.
in stock
part-no: 06.3247/STAMP3
HAMMER-DRIVE SCREW No 6 x 1/4" ROUND-HEAD
quantity required: 4
in stock
part-no: 06.12874
DECAL "RECOMMENDED OIL BRANDS" DRYFIX
in stock
part-no: 06.39775
DZUS FASTENER ASSEMBLY
in stock
part-no: 06.24896
CIRCLIP (DZUS FASTENER)
in stock
part-no: 06.134106.0443
REAR WHEEL ADJUSTER BLOCK (for weld repair)
in stock
part-no: 06.044306.0783
BRAKE CABLE ABUTMENT SWINGING ARM (FOR WELD REPAIR)
in stock
part-no: 06.078306.1274
REINFORCEMENT PATCH FOR CHAINGUARD (for WELD REPAIR)
in stock
part-no: 06.127406.4822
CHAINGUARD EXTENSION FLAP Steel. Black
in stock
part-no: 06.482206.4823
BUTTON for CHAINGUARD EXTENSION
in stock
part-no: 06.482306.4824
SPRING for CHAINGUARD EXTENSION Commando 850
in stock
part-no: 06.48247
BRACKET - SIDE PANEL SUPPORT
in stock
part-no: 06.12048
HEX. SCREW 1/4"UNF x 5/8" (NM26146)(06.0865)
in stock
part-no: 14.01029
PLAIN WASHER 1/4" (18315) (00.0012) (02.1579) (NME5379) (NM19435)
quantity required: 2
in stock
part-no: 60.232010
NUT 1/4"UNF ZINC AND PASS (26947) (03.3057)
in stock
part-no: 14.030111
LIPPED WASHER (NME 6742) (A2/279)
quantity required: 4
in stock
part-no: 06.761212
SEAT SECURING KNOB (06.0647) Polished finish
quantity required: 2
in stock
part-no: 06.400912a
SEAT KNOB ASSEMBLY & FIXING KIT (COMMANDOm 750/850 from 1968-1974) Polished finish
quantity required: 2
in stock
part-no: 13.182313
ROLL PIN - SEAT KNOB
quantity required: 2
in stock
part-no: 06.069513.2113 Rear chain adjuster kit
REAR CHAIN ADJUSTER KIT (for Commando 750 & 1973/1974 850, but not 850Mk3)
in stock
part-no: 13.211313.2123 Rear suspension fixing kit
FIXING KIT: Bolts, nuts & washers for a pair of REAR SUSPENSION UNITS, COMMANDO 750 850 (1968 to 1974)
in stock
part-no: 13.212313.2138 Chainguard extension kit
REAR CHAINGUARD EXTENSION SET for COMMANDO 850
in stock
part-no: 13.213814
SWINGING ARM (WITH GUSSET REINFORCEMENT)
out of stock
(contact us for an availability quote)
part-no: 06.453914a
CHAINGUARD FIXING BRACKET (FOR WELD REPAIR)
check required quantity!
in stock
part-no: 06.044414b
REINFORCEMENT GUSSET FOR SWING ARM (WELDING REQUIRED)
check required quantity!
in stock
part-no: 06.454015
SWINGING ARM DUST COVER
quantity required: 2
in stock
part-no: 06.044616
SWING ARM PIVOT BUSH (PRE MK3 - LONG)
quantity required: 2
in stock
part-no: 06.044717
SWING ARM PIVOT O RING (LARGE)
quantity required: 2
in stock
part-no: 06.044918
SWING ARM PIVOT O RING (SMALL)
quantity required: 2
in stock
part-no: 06.044819
REAR WHEEL ADJUSTER
quantity required: 2
in stock
part-no: 06.065020
NUT 5/16"UNF (PLAIN - THIN) 28681 (06.0651) ZINC PLATED
quantity required: 2
in stock
part-no: 14.040221
SWING ARM SPINDLE (STD. DIA.) (6.96" LONG) Hard chrome plated
in stock
part-no: 06.045321A s/arm spindle kit
SWINGING ARM SPINDLE KIT (COMMANDO 1968 TO 1974)
in stock
part-no: 13.174421B End cap, seal and rod set
SWINGING ARM END CAP, SEAL AND ROD SET (COMMANDO 750 850 from 1968 to 1974)
in stock
part-no: 13.189422
HEX. SCREW 1/4"UNF x 1/2" (NM26484)(06.0327)(06.8075)
in stock
part-no: 14.010123
PLAIN WASHER 1/4" (18315) (00.0012) (02.1579) (NME5379) (NM19435)
in stock
part-no: 60.232024
SWING ARM END CAP LH
in stock
part-no: 06.086925
SWING ARM END CAP RH
in stock
part-no: 06.086826
SWINGING ARM ROD ASSEMBLY
in stock
part-no: 06.087327
COPPER WASHER
in stock
part-no: 06.087128
OIL NIPPLE (00.0051) (60.1841) (NW100)
in stock
part-no: 06.341129A
REAR SUSPENSION BUSH 3/8" GIRLING
check required quantity!
in stock
part-no: 06.735929
REAR SUSPENSION UNITS - EXPOSED SPRING (PAIR) GIRLING TYPE COMMANDO 1971 TO 1974 Distance between centres: 12.9 inches Spring rate: 118 lbs/inch
in stock
part-no: 06.217933
SUSPENSION UNIT BOLT - TOP
quantity required: 2
in stock
part-no: 06.046534
PLAIN WASHER 3/8" (00.0010, NME5376, NME5455, APCP2696-155)
quantity required: 6
in stock
part-no: 60.232235
NUT 3/8" UNF FULL ZINC/CLEAR PASS. (06.0029)(06.3245)(21998)
quantity required: 2
in stock
part-no: 14.030336
SUSPENSION UNIT BOLT - BOTTOM
quantity required: 2
in stock
part-no: 06.046337
PLAIN WASHER (NM22636)
quantity required: 2
in stock
part-no: 06.780838
PLAIN WASHER 3/8" THIN
quantity required: 2
in stock
part-no: NM2329839
NUT 3/8" UNF FULL ZINC/CLEAR PASS. (06.0029)(06.3245)(21998)
quantity required: 2
in stock
part-no: 14.030340
SIDE STAND LEG - USE SPACER 06.5491
in stock
part-no: 06.549040B Side stand fitting kit
FITTING KIT FOR SIDE STAND COMMANDO 750 850 1971 to 1978
in stock
part-no: 13.189340A (Side Stand Kit)
SIDE STAND (PROP) KIT COMPLETE (including fitting parts) ENGINE NO.141783 ONWARDS
in stock
part-no: 06.635741A (for original Sidestand)
PIVOT SPACER - SIDE STAND
in stock
part-no: 06.287141B (for new Sidestand 06.5490)
PIVOT SPACER - SIDE STAND
in stock
part-no: 06.549142
SIDE STAND (PROP) SPRING Commando 750 850 1973 onwards
in stock
part-no: 06.259243
PLAIN NUT 7/16" UNF (THIN) (14.0404) (20948)
in stock
part-no: 06.308944
PLAIN WASHER 7/16" (THIN) (06.3141)(NME5377)
in stock
part-no: 60.233245
SPRING WASHER 7/16" 26494
in stock
part-no: 60.243046
PROP STAND BOLT (HIGH TENSILE) (06.2872)
in stock
part-no: 06.543647
RUBBER STOP - SIDE STAND
in stock
part-no: 06.332448
CHAINGUARD Chrome plated for Commando 750 and 850 (1970 to 1973)
in stock
part-no: 06.186548A
CHAINGUARD as fitted to 1974 850Mk2A. Chrome plated. With brake shoe inspection cutaway and fitting holes for extension piece.
check required quantity!
in stock
part-no: 06.581849
HEX. BOLT 1/4"UNFx1 3/4" (NM27436)(06.0459) ZINC PLATED
quantity required: 2
in stock
part-no: 14.020650
PLAIN WASHER 1/4" (18315) (00.0012) (02.1579) (NME5379) (NM19435)
quantity required: 4
in stock
part-no: 60.232051
NUT 1/4"UNF ZINC AND PASS (26947) (03.3057)
quantity required: 2
in stock
part-no: 14.030152
FIBRE WASHER - OIL NIPPLE
in stock
part-no: 06.4061
