Barnett friction plate set
Clutch bonded metal FRICTION plate set of 4 Barnett USA (0.146'') for Norton Commando 750

in stock

1
INNER CHAINCASE complete with PLATES including FELT SEAL (SUPPLIED LOOSE)

in stock

2
INNER CHAINCASE SEALING DISC

quantity required: 2

in stock

3
DOWEL - CHAINCASE

quantity required: 2

in stock

4
FELT SEAL WASHER - CHAINCASE

in stock

5
GASKET for INNER CHAINCASE TO CRANKCASE (Pre 850Mk3)

in stock

6
CHAINCASE FIXING SCREW 1/4" WHIT ZINC PLATED

quantity required: 3

in stock

06.5441/CRANKEDLINKELITE
REAR CHAIN CRANKED LINK (IWIS ELITE) 5/8" x 3/8"

in stock

06.5441/CRANKEDLINK
REAR CHAIN CRANKED LINK (RENOLD) 5/8" x 3/8" (530)

in stock

06.5441/LINKRENOLD
REAR CHAIN SPLIT LINK (RENOLD) 5/8" x 3/8" (530)

in stock

06.5441/SOFTLINK
REAR CHAIN RIVET LINK (RENOLD) 107 5/8" x 3/8" (530)

in stock

06.5441/SOFTLINKELITE
REAR CHAIN RIVETING LINK (IWIS ELITE) 5/8" x 3/8"

in stock

7
LOCKING PLATE for inner chaincase fixing screws

quantity required: 3

in stock

8
STUD - CHAINCASE CENTRE

in stock

9
PLAIN WASHER 3/8" (00.0010, NME5376, NME5455, APCP2696-155)

quantity required: 2

in stock

10
NUT 3/8" UNF FULL (NYLOC) STEEL/ZINC

in stock

11
SHIM for CHAINCASE CENTRE STUD

check required quantity!

in stock

12
STATOR STUD

quantity required: 3

in stock

13
SPACER- STATOR STUD

quantity required: 3

in stock

13.2063 Timing disc fixing kit
Fixing kit for crankshaft ignition timing disc (Commando 750/850)

in stock

14
PLAIN WASHER 5/16" (D12/864)(NME5380)(NMT2211)(00.0011)

quantity required: 3

in stock

15
NUT 5/16" UNF (7/16" A/F) (06.0700)

quantity required: 3

in stock

16
OUTER CHAINCASE (06.1025) (06.0370) including ignition timing plate

in stock

17
IGNITION TIMING DEGREE SCALE

in stock

18
HAMMER-DRIVE SCREW

quantity required: 2

in stock

19
CHAINCASE INSPECTION CAP (LARGE) Polished finish

quantity required: 2

in stock

19/21 inspection cover kit
INSPECTION COVER KIT Polished finish including O rings PRIMARY SIDE COMMANDO 1969-1974

in stock

20
O RING for PRIMARY SIDE CHAINCASE INSPECTION CAP (LARGE)

quantity required: 2

in stock

21
CHAINCASE INSPECTION CAP (SMALL) Polished finish

in stock

22
O RING for PRIMARY SIDE CHAINCASE INSPECTION CAP (SMALL)

in stock

23
CHAINCASE SEALING BAND

in stock

23A (neoprene alternative)
Primary chaincase seal Material: neoprene cord. For Commando 1968 to 1974 (Replaces part 06.0398)

check required quantity!

in stock

24
CHAINCASE CENTRE FIXING NUT Chrome Plated

in stock

25
WASHER- CHAINCASE CENTRE NUT

in stock

26
CRANKSHAFT (ENGINE) SPROCKET for Commando 750 850 1968 to 1974

in stock

27
KEY - ENGINE SPROCKET (NME 3682) (A2/474) (A11/797) (50.0169)

in stock

28
ALTERNATOR ROTOR LUCAS 60600444 (LU54202299)

in stock

29
STATOR LUCAS RM21 120w 2 wire 47205A/06.1177

in stock

30
GROMMET - ALTERNATOR LEAD (04.1065)

in stock

31
ROTOR SPACER

in stock

32
ROTOR ALIGNMENT SHIM .010".

check required quantity!

in stock

33
ROTOR ALIGNMENT SHIM .036".

check required quantity!

in stock

34
KEY- ALTERNATOR ROTOR (NM20948)

in stock

34a Woodruff key set
WOODRUFF KEY SET (5 pieces: engine sprocket, oil pump spindle, crankshaft, camshaft & alternator)

in stock

35
WASHER SHAKEPROOF for crankshaft drive side under rotor nut (NM24948) (21.7024)

in stock

36
ROTOR NUT (06.0387)

in stock

37
PRIMARY CHAIN COMMANDO TRIPLEX 92 links

in stock

38
OIL LEVEL SCREW (06.0389) Chrome Plated

in stock

39
O RING for PRIMARY SIDE CHAINCASE OIL LEVEL SCREW (70.7431)

in stock

40
CLUTCH ASSEMBLY COMPLETE (COMMANDO 750) 4 friction/3 plain plates

out of stock

41
CLUTCH CHAINWHEEL complete with BACKPLATE (06.0742)

out of stock

41B
RIVET - CLUTCH BACKPLATE

in stock

41A
BACKPLATE - CLUTCH (06.0744)

in stock

42
CLUTCH PLATE (Fibre) Surflex to Andover Norton design

quantity required: 4

out of stock

43b
Clutch PLAIN plate 2mm thick for Norton Commando 750/850 Barnett USA

quantity required: 3

in stock

43a (3mm thick)
Clutch plain plate for Commando 750/850 (3mm thick hardened and ground) *Replaces one 2mm thick plate to achieve a lighter clutch lever action*

check required quantity!

in stock

43
CLUTCH PLAIN PLATE (use 13.1922)

quantity required: 3

out of stock

44
CLUTCH PRESSURE PLATE - THICK 1/4" thick at edge (use with fibre plates & Barnett 13.1923)

in stock

45
CLUTCH CENTRE (06.0743)

in stock

46
CLUTCH DIAPHRAGM SPRING

in stock

47
CLUTCH PUSHROD ADJUSTER (06.0308)

in stock

48
LOCKNUT 1/2" UNF ZINC PLATED

in stock

49
CLUTCH CENTRE BEARING (55.0743) FAG Schaeffler

in stock

50
CLUTCH BEARING INNER CIRCLIP

in stock

51
CLUTCH BEARING OUTER CIRCLIP

in stock

52
CLUTCH SPRING RETAINING CIRCLIP (55.0471)

in stock

53
CLUTCH LOCATION CIRCLIP (MAINSHAFT)

in stock

54
SPACER - CLUTCH LOCATION

in stock

55
CLUTCH ALIGNMENT SHIM .032".

check required quantity!

in stock

56
CLUTCH ALIGNMENT SHIM .048".

check required quantity!

in stock

57
CLUTCH CENTRE NUT (E6254) (A2/372) (8652)

in stock

58
LOCKWASHER - CLUTCH NUT (E6266) (A2/373)

in stock

59a (98 links)
REAR CHAIN (IWIS ELITE) 98 LINKS 5/8" x 3/8" (530) for 19 tooth gearbox sprocket

in stock

59d (link)
REAR CHAIN LINK (IWIS ELITE) 5/8" x 3/8" (530)

check required quantity!

in stock

59b (99 Links)
REAR CHAIN (IWIS ELITE) 99 LINKS 5/8" x 3/8" (530) for 20 & 21 tooth gearbox sprocket

in stock

59c (100 links)
REAR CHAIN (IWIS ELITE) 100 LINKS 5/8" x 3/8" (530) for 22 tooth gearbox sprocket (60.0444)

in stock

59 (102 links)
REAR CHAIN (IWIS ELITE) 102 LINKS 5/8" x 3/8" (530) 02.2876) (60.0444)

in stock